Miter saw is one of the essential woodworking tools that every beginner should have and learn how to use. This tool will help you accomplish lots of things, from crosscutting lumber to repetitive cuts to crown moldings with accurate results.

Even if you are a beginning woodworker, using a miter saw should not be overwhelming. The miter saw operation principle is straightforward to implement. Plus, if you try the following tips, you can achieve better and safer cuts.

Use a Stop Block to Make Repetitive Cuts

Are you having a hard time making repetitive cuts? Whether you are carrying out a building construction project or making furniture, you need to make repetitive cuts. You can set the measurement on the miter saw by clamping a stop block to the saw stand. After that, you can make cuts as many as you want.

Meanwhile, if you want to learn about the Dewalt DWS715 compound miter saw that has high power and excellent cutting capacity, check out the review.

Install a Laser

Most new miter saw models are designed with a laser which lights a thin line exactly where the blade cuts through. With the laser line, you can cut faster than before. That is because you do not need to bring the saw blade down to the line.

After the laser line is exactly on the mark, you start sawing. Then, bring it down on the workpiece and through your mark.

Upgrade the Saw Blade

Upgrading the saw blade is one of the best tips to save you from lots of stress and frustrations. Wanting to have better cuts means you need to upgrade the saw blade to a better one.

If you are engaged in finish cabinetry or carpentry, a saw blade upgrade is an advantage. That is because you need smooth and flush cuts.

Let the Saw Blade Reach the Maximum Speed

For safety reasons, you need to allow the blade to reach the maximum speed. After you squeeze the miter saw’s power button, wait for few seconds for the blade to reach maximum speed before you let it down on the workpiece. That way, rest assured that the saw will cut through the wood with no hiccups.

Once you make a cut, ensure to release your hand from the trigger. Ensure to allow the blade to rest by not raising it from the workpiece. It would help if you also held the workpiece firmly.

Cut Wider Boards

Is your miter saw not a sliding type? If yes, the boards’ width you can cut using it is limited. However, you can cut wider boards. All you have to do is to place the board under the wide board and start cutting.

If you do this tip, you will notice an increased cutting capacity. Alternatively, you can cut wider boards by cutting one board side first. After that, you can flip it over before cutting the other side.

Utilize a Mobile Miter Saw Stand

Without placing your miter saw on a stand, it would be hard for you to use it efficiently. If you are on the job site, you have to move the saw from one position to another. However, in your workshop, you need to place the saw on the workbench.

Instead of using a fixed workbench, you can take advantage of a mobile miter saw stand. That is to ensure the miter saw becomes more efficient, comfortable, and flexible to use.

Use a Red Marker

While you are using a miter saw, ensure to protect your hands against the blades. You can do that by marking the areas where the saw blade passes through. You also need to keep your hands away from those areas.

Conclusion

Do not stress yourself when using a miter saw. Follow any or all of the tips above, and you can achieve a better and safer cut in no time.