
There’s rarely time to think about plumbing at an open for inspection. You’ve got twenty minutes, a crowd in the kitchen, and an agent keen to talk about the north-facing backyard. Nobody’s lifting the manhole cover or running the shower for five minutes to see what the pressure does.
That’s a problem in Melbourne’s established eastern suburbs, where a large share of the housing went up between the 1960s and the 1980s. Those homes are solid. Their pipes are now forty to sixty years old, and some of what’s in the ground was never meant to last this long.
Why a standard building inspection isn’t enough
A building and pest inspection is worth doing, but it’s mostly a visual report. Inspectors note what they can see, and plumbing is largely what they can’t: under the slab, inside the walls, and running beneath the lawn to the sewer connection.
Timing matters too. In Victoria, a private sale usually comes with a three business day cooling-off period. Buy at auction and you get none. So if the house is going under the hammer, any plumbing checks need to happen before auction day, not after.
What’s usually hiding in a 60s or 70s home
The problems are fairly predictable once you’ve seen enough of these houses. A plumber walking through an older brick veneer in the east will usually be looking for:
- galvanised steel water pipes, which rust from the inside and slowly choke water pressure before they fail- original clay sewer lines, where tree roots find their way in through the joints
- a hot water system near or past the end of its life (most last somewhere around 10 to 12 years)
- tired roof plumbing, especially on tiled roofs with valley gutters and old flashings around chimneys
- signs of a hidden leak, like a damp smell, lifting floorboards or a skirting board that’s swollen at the bottom
None of these will necessarily kill a sale. But each one comes with a price tag, and it’s much better to know about it while there’s still room to negotiate.
A few things you can check yourself at the inspection
Turn on the kitchen tap and the shower at the same time. If the flow drops noticeably, the pipes may be partly blocked with corrosion. Brown or rusty water when a tap first runs points the same way.
Have a look at the hot water unit too. Most have a compliance plate or sticker with a manufacture date, and rust around the base is a bad sign. Flush the toilet and listen. Slow draining or gurgling from a nearby sink can mean the sewer line is partly blocked.
Then step outside. Big established trees close to the house are lovely to look at, but their roots go looking for water, and old clay pipes are an easy target.
When to bring in a plumber before you buy
If the house is older and you’re serious about it, a pre-purchase plumbing check is cheap insurance. A camera inspection of the sewer line shows root intrusion, cracks or collapsed sections that nobody could pick up from the surface. Thermal imaging and acoustic leak detection can find water escaping inside walls or under the slab without lifting a tile.
For buyers looking around Doncaster, Templestowe or Bulleen, booking a local plumber in Doncaster homeowners already rely on makes a real difference. Someone who works in the area every week knows which streets tend to have root problems, which era of house usually still has galvanised pipe, and what a fair repair cost actually looks like.
The report gives you options. You can ask the vendor to fix something, push the price down, or walk away with a clear conscience.
The cost of finding out later
Replacing a collapsed sewer line or re-piping a whole house can run into thousands. If water has been leaking slowly into a wall cavity for years, the damage can stretch to mould and rotting timber as well. None of that shows up in the listing photos.
An older home in the east can still be a great buy. Before you commit to one, have a plumber walk through it, check the drains and test for leaks, so the first big surprise isn’t waiting for you after settlement.
| < Prev | Next > |
|---|




